Storm Mountain Bed
$1,250.00 – $1,812.00
The Storm Mountain log bed is handcrafted from logs harvested from dead stands of Aspen groves in Colorado’s and Wyoming’s Rocky Mountains. Unique from other Aspen beds, our Storm Mountain Bed contains an arched headboard and footboard along with log spindles reflecting a sunburst design. This attractive bed has become one of our most popular log beds in recent years. This bed is pictured in the lighter-peeled aspen finish.
All of our log beds are built with mortise and tenon construction, sturdy enough to last for generations. This bed includes slats, ready to support a box spring and mattress
1.Dimensions & weight
King Size: 89″x93″x56″, 250 lbs
California King: 85”x97”x54”, 250 lbs
Queen: 72″x93″x56″, 230 lbs
Full: 66″x86″x56″, 220 lbs
Twin: 50″x86″x56″, 180 lbs
Headboard post height 54”
Footboard post height 34”
Clearance from floor to bottom of side rail 5”
Height from floor to top of bed slats 9”
Height from floor to bottom of headboard rail 23”
Height from floor to top of footboard rail 32-34”
Recommended mattress & box spring thickness combined 14-19”
2.Wood or material – aspen
3. Finish – beeswax & linseed oil
4.Lead time – generally 4-8 weeks
5.Warranty – We guarantee the quality of materials & workmanship of our furniture when used in an intended manner. Cracks, knots, worm holes, & color variations add character to the wood and are not defects. If a crack compromises the structural integrity of the wood, it will be replaced at our expense. All Blue Ridge Log Works furniture is warranted for 5 years on all parts. The specifics on warranty service depends upon the nature of the problem.
LOG BED ASSEMBLY INSTRUCTIONS
RECOMMENDATIONS FOR ASSEMBLY
– RUBBER MALLET
– 9/16” DEEP SOCKET
– ½” DRILL WITH SOCKET ADAPTER OR SOCKET WRENCH
1 – HEADBOARD
1 – FOOTBOARD
2- PLATFORM SIDE RAILS (MARKED ENDS)
2 – UPPER SIDE RAILS (UNMARKED ENDS)
3 – SLATS(1 ½” x 3 1/2″ )
8 – 3/8” x 6” LAG SCREWS W/WASHERS
8 – PLUGS
STEP 1 – LAY OUT THE 2 PLATFORM SIDE RAILS ON THE FLOOR
MATCHING THE LABELING ON THE ENDS OF THE SIDE RAILS WITH THE LABELING IN THE RAIL HOLES IN THE HEADBOARD AND FOOTBOARD
STEP 2 – INSERT 1 PLATFORM SIDE RAIL(MARKED) INTO RAIL HOLES IN HEADBOARD & FOOTBOARD
STEP 3 – INSERT 1 END OF OTHER PLATFORM SIDE RAIL (MARKED) INTO RAIL HOLE
STEP 4 – INSERT SLATS FOR THE CORRESPONDING HOLES INTO ONE END OF THE SLAT HOLES
ROLL THE SLATS SO THE WORDS “UP” ARE ON TOP.
STEP 5 – INSERT THE OTHER END OF THE SLATS INTO HOLES AS YOU INSERT OTHER PLATFORM
SIDE RAIL INTO RAIL HOLE(TAP IN WITH MALLET IF NECESSARY)
STEP 6 – INSERT UPPER SIDE RAILS (UNMARKED RAILS) INTO RAIL HOLES
STEP 7- INSERT LAG SCREWS THROUGH BED POSTS INTO SIDE RAILS.
TIGHTEN ALL LAG SCREWS 3/4 IN USING 9/16″ DEEP SOCKET WITH 1/2″ DRILL OR SOCKET WRENCH
CAREFULLY TIGHTEN ALL LAG SCREWS COMPLETELY IN UNTIL RAIL STOPS PULLING INTO HOLE IN POST.
STEP 8 – King beds only – PLACE CENTER SUPPORT – UNDER SLATS –
STEP 9 – TAP PLUGS INTO SMALL HOLES COVERING LAG SCREWS
STEP 10 – ENJOY YOUR BED!
PLATFORM BEDS WTH PLY DECK-NO BOXSPRING
Follow steps 1-9 from above
10. PLACE PLYWOOD DECK ON TOP OF SLATS AND
SECURE WITH 1 5/8” WOOD SCREWS
Smaller items will be shipped UPS or Fed Ex ground. Larger items and or larger orders will be shipped freight, CURBSIDE DELIVERY ONLY
Flat rate shipping costs are $99 per order for the 48 contiguous United States.
Lift gate service is included with all orders over 150 lbs.
Additional charges may be incurred if destination is in a remote area.
Contact us for more information
UPS or Fed Ex items will be boxed. Standard motor freight items will be secured to a pallet.
We will contact you prior to shipping your order to let you know it is ready to ship and give an estimated transit time of your shipment. Most shipments take 5-10 days to arrive at final destination.
Also, we will give you tracking information so you can track the shipment if you desire
When your order reaches the nearest destination terminal, the freight company should be contacting you to schedule the final delivery. Someone needs to be present to accept the shipment. Since the shipment is sent “Curbside delivery”
The freight company is responsible for placing the freight at your curb on the ground via a lift gate. We recommend having a utility knife available to break down the packaging and making it easier to move.
In rare cases, damages do occur during transit. PLEASE INSPECT YOUR ORDER UPON ARRIVAL TO ENSURE NO DAMAGE. IT IS YOUR RESPONSIBILITY TO INSPECT ALL FREIGHT AND NOTE THE DAMAGE ON THE BILL OF LADING BEFORE SIGNING IT IF IT DOES OCCUR. Verify the quantity of items received matches the bill of lading. If the damage is repairable, note the damage on the bill of lading and save all packing materials. An inspection of the damaged item & packing materials may occur at a future date for verification. If the damage is major and unacceptable, refuse the shipment and contact us immediately at 970 484-8875. If the delivery driver is unwilling to wait for you to inspect the furniture, note that on the bill of lading as well.
We offer local inside delivery and assembly (if required) for up to 150 miles from our location at 400 Delozier Dr, Ft. Collins, 80524.
Contact us for in town delivery charges.
As a rule of thumb, fees are $1.50 per mile one way with a minimum of $65
You are welcome to pickup your order at our location as well.