Homestead Wilderness Bed
$1,843.00 – $2,432.00
King: 89″x93″x52″, 215lbs
Queen: 72″x93″x52″, 195 lbs
Full: 66″x86″x52″, 185lbs
Twin: 50″x86″x52″, 165lbs
Headboard post height 57”
Footboard post height 34”
Clearance from floor to bottom of side rail 7”
Height from floor to top of bed slats 10”
Height from floor to bottom of headboard rail 23 1/2”
Height from floor to top of footboard rail 30”
Recommended mattress & box spring thickness combined 14-19”
2.Wood or material – reclaimed pine, live edge pine, blue pine & aspen
3. Finish – beeswax & linseed oil
4.Lead time – generally 4-8 weeks
5.Warranty – We guarantee the quality of materials & workmanship of our furniture when used in an intended manner. Cracks, knots, worm holes, & color variations add character to the wood and are not defects. If a crack compromises the structural integrity of the wood, it will be replaced at our expense. All Blue Ridge Log Works furniture is warranted for 5 years on all parts. The specifics on warranty service depends upon the nature of the problem.
Flat rate shipping costs are $99 per order for the 48 contiguous United States.
Lift gate service is included with all orders over 150 lbs.
Additional charges may be incurred if destination is in a remote area.
Contact us for more information
UPS or Fed Ex items will be boxed. Standard motor freight items will be secured to a pallet.
We will contact you prior to shipping your order to let you know it is ready to ship and give an estimated transit time of your shipment. Most shipments take 5-10 days to arrive at final destination.
Also, we will give you tracking information so you can track the shipment if you desire
When your order reaches the nearest destination terminal, the freight company should be contacting you to schedule the final delivery. Someone needs to be present to accept the shipment. Since the shipment is sent “Curbside delivery”
The freight company is responsible for placing the freight at your curb on the ground via a lift gate. We recommend having a utility knife available to break down the packaging and making it easier to move.
In rare cases, damages do occur during transit. PLEASE INSPECT YOUR ORDER UPON ARRIVAL TO ENSURE NO DAMAGE. IT IS YOUR RESPONSIBILITY TO INSPECT ALL FREIGHT AND NOTE THE DAMAGE ON THE BILL OF LADING BEFORE SIGNING IT IF IT DOES OCCUR. Verify the quantity of items received matches the bill of lading. If the damage is repairable, note the damage on the bill of lading and save all packing materials. An inspection of the damaged item & packing materials may occur at a future date for verification. If the damage is major and unacceptable, refuse the shipment and contact us immediately at 970 484-8875. If the delivery driver is unwilling to wait for you to inspect the furniture, note that on the bill of lading as well.
We offer local inside delivery and assembly (if required) for up to 150 miles from our location at 400 Delozier Dr, Ft. Collins, 80524.
Contact us for in town delivery charges.
As a rule of thumb, fees are $1.50 per mile one way with a minimum of $65
You are welcome to pickup your order at our location as well.
– RUBBER MALLET
– 9/16” DEEP SOCKET
– ½” DRILL WITH SOCKET ADAPTER OR SOCKET WRENCH
1 – HEADBOARD
1 – FOOTBOARD
2 – SIDE RAILS
3 – SLATS (1 ½” x 3 1/2″ )
8 – 3/8” x 6” LAG SCREWS W/WASHERS
8 – PLUGS
6 – 2 ½” WOOD SCREWS
INSERT SIDE RAILS INTO RAIL HOLES WITH CLEAT ON THE BOTTOM SIDE
INSERT LAG SCREWS THROUGH BED POSTS INTO SIDE RAILS.
1.TIGHTEN ALL LAG SCREWS 3/4 IN USING 9/16″ DEEP SOCKET WITH
2.1/2″ DRILL OR SOCKET WRENCH.CAREFULLY TIGHTEN ALL LAG SCREWS COMPLETELY IN UNTIL RAIL STOPS PULLING INTO HOLE IN POST.
3. PLACE SLATS (1 1/2 x 3 1/2) ON TOP OF SIDE RAIL CLEATS – SECURE SLATS TO CLEATS
WITH 2 ½” WOOD SCREWS
FOR KING BEDS – PLACE CENTER SUPPORT ON THE FLOOR UNDER SLATS IN THE CENTER
5. TAP PLUGS INTO SMALL HOLES COVERING LAG SCREWS
-6.ENJOY YOUR BED!
PLATFORM BEDS WITH PLYWOOD DECK-NO BOX SPRING REQUIRED
INSERT SIDE RAILS INTO RAIL HOLES WITH CLEAT LOCATED ON THE BOTTOM SIDE
ATTACH SIDE RAILS TO POSTS BY SECURING LAG SCREWS THROUGH HOLES IN ANGLE BRACKETS
PLACE SLATS ON TOP OF SIDE RAIL CLEATS & SECURE WITH 2 ½” WOOD SCREWS.
FOR KING BEDS – PLACE CENTER SUPPORT ON THE FLOOR UNDER THE SLATS IN THE CENTER
PLACE PLYWOOD DECK ON TOP OF SLATS AND SECURE WITH 1 5/8” SCREWS
TAP PLUGS INTO SMALL HOLES COVERING LAG SCREWS
ENJOY YOUR BED!